OreStocks

Southern Energy Corp press release

Armistice Resources Corp. reports first in-fill drilling results

TSXV - TSX Venture Exchange · Natural Gas · Natural Gas Liquids · Oil · Canada

Issued and Outstanding common shares: 60,130,435

TORONTO, Jan. 8 /CNW/ - Armistice Resources Corp. (TSX: AZ) ("Armistice" or the "Corporation") is pleased to report new results from the in-fill definition drilling programme recently completed on the 2250 Level at the McGarry Gold Project at Virginiatown, Ontario.

Previous definition drilling programmes on this level left a gap between the 600W and 1100W sections. A total of 31new in-fill definition holes were drilled during 2007 and 2008. Results have been received for the 13 new holes drilled on the three sections: 600W, 700W and 800W. New intersections include the following highlights:

DDH 22W70-3 0.45 oz/t gold over 3.0 ft core length DDH 22W80-3 0.38 oz/t gold over 2.8 ft core length DDH 22W60-4 0.29 oz/t gold over 4.6 ft core length DDH 22W70-3 0.28 oz/t gold over 3.8 ft core length

The 2250 Level is the most developed in the mine and is also the level on which the recently completed bulk sampling programme was carried out.

As noted in the press release of August 21, 2008 which discusses results of the bulk sampling programme, the main significance of a diamond drill hole intersection is the identification of gold-bearing zones. The mined grade of a zone may vary from the grade of wide spaced drill holes as reported here. This is due to the very small sample represented by individual drill holes within a gold bearing zone that is characterised by large internal variation in gold distribution. This is a typical observation from many narrow-vein gold mines including the Kerr Addison.

In total there are 24 holes (both new and old) on these three sections. In these 24 holes there are 38 intercepts of at least 0.10 oz/t gold including the following highlights from previous drilling:

DDH 22W70-1 4.26 oz/t gold over 8.5 ft core length DDH 22W60-2 0.34 oz/t gold over 7.4 ft core length

None of the results from the holes on these sections were included in the resource estimate included in the NI 43-101 report filed on Sedar on 17 June 2004.

When all the assay results are available, including those from the deep drilling programme, they will be included in the revised NI 43-101 compliant resource estimate. Clearing the backlog of logging and sampling of the deep drilling and exploration up-holes is currently in progress.

The main 2250 level east-west drift is located in the footwall about 100 feet south of the target alteration package which hosts numerous gold zones in a geological environment very similar to the adjacent former Kerr Addison Mine which produced over 11 million ounces of gold.

Drill stations at 100 foot intervals are established along the 2250 drift. From each of these stations a fan of holes testing the gold bearing alteration zone to the north has been drilled. Typically the holes have dips from +52 degrees (up-holes) to -52 degrees (down-holes) and lengths of about 700 feet, although the actual hole parameters vary depending on local circumstances and geology encountered in the hole. The intersections given in the table are core lengths and not true widths. True widths are most accurately represented by the core lengths in the flatter holes and may be about 60% of the core lengths for the steeper holes.

The drill programme employs a QA/QC procedure consistent with NI 43-101 and industry best practices. The drill core is sawn and half-core samples are sent to either Swastika Laboratories Ltd. in Swastika, Ontario or PolyMet Labs in Cobalt, Ontario for standard fire assaying. Armistice submits duplicate quarter cuts for about 5% of the samples to the other lab and includes about 5% blanks in the samples sent to the labs. In addition the labs themselves include standards, duplicates and blanks as part of their regular QA/QC procedures.

The work reported on in this information release is supervised by Erik Andersen, P.Eng., Vice President and COO of Armistice and Qualified Person. Mr. Andersen has reviewed and approved this release.

Armistice is a Canadian exploration company that owns the McGarry project in North-eastern Ontario located on the prolific Larder Lake break. The McGarry project is an advanced exploration underground gold project consisting of 34 contiguous patented mining claims and licences of occupation totaling 484 hectares which adjoins the former producing Kerr Addison gold mine.

ARMISTICE RESOURCES CORP.

"Todd J. Morgan"

Todd J. Morgan President, CEO and Chairman of the Board

Earlier from Southern Energy Corp