Energy Fuels Inc. press release

Talisker Intersects 121.00 g/t Au over 1.00 m within 59.29 g/t Au over 2.10 metres, from the 2026 Bralorne Gold Project Resource Conversion Program

2026-04-07

NYSE - New York Stock Exchange · Uranium · Vanadium · Rare Earth Elements · Titanium · Zirconium · United States · Drill Results

Talisker Intersects 121.00 g/t Au over 1.00 m within 59.29 g/t Au over 2.10 metres, from the 2026 Bralorne Gold Project Resource Conversion Program

TORONTO, April 07, 2026 (GLOBE NEWSWIRE) -- Talisker Resources Ltd. (“Talisker” or the “Company”) (TSX:TSK | OTCQB:TSKFF) is pleased to announce results from the initial 25 drill holes from early 2026, predominantly targeting dip and strike extensions in the major ore veins at its currently producing Mustang Mine.

Highlights from the initial 25 drill holes include:

SB-2026-001 - 13.60 g/t Au over 0.80 m within 4.96 g/t Au over 2.95 m on the 55 Vein

SB-2026-002 - 10.80 g/t Au over 0.80 m within 6.06 g/t Au over 2.85 m on the 55HW Vein

SB-2026-002 - 121.00 g/t Au over 1.00 m within 59.29 g/t Au over 2.10 m on the 276 Vein

SB-2026-002 - 9.76 g/t Au over 0.50 m within 5.87 g/t Au over 2.05 m on the 55 Vein

SB-2026-004 - 78.30 g/t Au over 0.65 m within 25.45 g/t Au over 2.25 m on the 55HW Vein

SB-2026-004 - 65.60 g/t Au over 0.50 m within 27.43 g/t Au over 2.05 m on the 55 Vein

SB-2026-006 - 32.70 g/t Au over 0.75 m within 9.83 g/t Au over 2.50 m on the 55HW Vein

SB-2026-007 - 7.25 g/t Au over 0.50 m within 5.80 g/t Au over 2.10 m on the 101 Vein

SB-2026-007 - 16.60 g/t Au over 0.65 m within 6.50 g/t Au over 2.50 m on the 55HW Vein

SB-2026-008 - 16.50 g/t Au over 0.50 m within 4.92 g/t Au over 2.55 m on the 55HW Vein

UB-2026-008 - 21.60 g/t Au over 0.80 m within 8.55 g/t Au over 2.05 m on the BK Vein

UB-2026-012 - 30.70 g/t Au over 0.88 m within 10.82 g/t Au over 2.60 m on the BK Vein

UB-2026-013 - 22.50 g/t Au over 1.00 m within 16.72 g/t Au over 3.00 m on the BK Vein

A total of eight surface diamond drill holes, comprising 3,188 metres of drilling, were completed from a single drill pad in the Bralorne West zone. In addition, underground drilling from one diamond drill bay at Mustang 1055 Level resulted in 17 diamond drill holes totaling 1,847 metres. The surface drilling is focused on infill drilling Bralorne West’s 101, 55 HW, 276, and 55 veins. The underground holes in this release were focused on infill drilling of the BK and BK-9870 vein to the east of the main Mustang workings.

Kyle Orr, Talisker’s Vice President Exploration commented, “Diamond drilling at Bralorne is off to a great start in 2026. We continue to see excellent gold grades and are especially excited about how the Bralorne West infill zone is shaping up. The new Bralorne West decline is about 200 metres away from our first underground drill bay in the Bralorne West zone. Putting an additional underground drill here will allow us to continue infill drilling this zone with increased efficiency.”

Two drills (one underground and one surface) are currently active on the project and have been operating continuously since early 2026. A third drill (underground) is anticipated to arrive in early to mid Q2 2026 and will be positioned in the Mustang Down ramp first to drill below the current resource on Alhambra, BK, and BK-9870, and then will move to the Bralorne West decline to continue delineation drilling of this zone above the 980 Level. Detailed geotechnical core drilling from surface in the Bralorne West zone is planned to begin in mid-April.

All drill holes in this release are located in the Mustang Mine and hosted in diorite intrusive and/or intermediate to felsic dykes. Major vein structures intersected are orogenic quartz-carbonate veins with banded sulfide septae. Crack-seal septae host fine-grained arsenopyrite and pyrite mineralization. Alteration halos consist of strong silica – sericite ± mariposite alteration with disseminated sulfides.

Bralorne Gold Project – 2025 Diamond Drilling TopIntercepts Table

Drill Hole NameFrom

(m)To

(m)Interval

(m)Au

(g/t)Interpreted Structure

SB-2026-001382.90383.700.8013.6055 Vein

SB-2026-001383.70384.851.153.2455 Vein

SB-2026-001384.85385.851.000.03Vein Halo

SB-2026-002371.30372.000.703.7955HW Vein

SB-2026-002372.00372.800.8010.8055HW Vein

SB-2026-002372.80374.151.354.42Vein Halo

SB-2026-002376.00376.500.502.39Vein Halo

SB-2026-002376.50377.100.603.87276 Vein

SB-2026-002377.10378.101.00121.00276 Vein

SB-2026-002381.00381.500.509.7655 Vein

SB-2026-002381.50382.250.750.8455 Vein

SB-2026-002382.25383.050.808.1555 Vein

SB-2026-003347.40348.501.100.01Vein Halo

SB-2026-003348.50349.000.500.08Vein Halo

SB-2026-003349.00349.500.5022.3055HW Vein

SB-2026-003349.50350.000.501.26Vein Halo

SB-2026-003369.00370.001.000.01Vein Halo

SB-2026-003370.00370.750.750.01Vein Halo

SB-2026-003370.75371.250.500.1055 Vein

SB-2026-003371.25371.800.5520.5055 Vein

SB-2026-004350.00351.001.000.01Vein Halo

SB-2026-004351.00351.600.6010.6055HW Vein

SB-2026-004351.60352.250.6578.3055HW Vein

SB-2026-004357.00358.001.000.05Vein Halo

SB-2026-004358.00358.500.507.14277 Vein

SB-2026-004358.50359.000.500.48Vein Halo

SB-2026-004372.25373.301.0511.80Vein Halo

SB-2026-004373.30373.800.5022.1055 Vein

SB-2026-004373.80374.300.5065.6055 Vein

SB-2026-005388.40389.401.000.23Vein Halo

SB-2026-005389.40390.200.800.0455 Vein

SB-2026-005390.20391.251.055.5255 Vein

SB-2026-006362.00362.850.850.0255HW Vein

SB-2026-006362.85363.600.7532.7055HW Vein

SB-2026-006363.60364.500.900.05Vein Halo

SB-2026-007270.20270.700.507.25101 Vein

SB-2026-007270.70271.550.855.02101 Vein

SB-2026-007271.55272.300.755.71101 Vein

SB-2026-007327.40328.050.6516.6055HW Vein

SB-2026-007328.05329.000.953.8355HW Vein

SB-2026-007329.00329.900.902.03Vein Halo

SB-2026-008295.90296.750.850.04Vein Halo

SB-2026-008296.75297.320.570.86101 Vein

SB-2026-008297.32297.900.5814.00101 Vein

SB-2026-008297.90298.500.600.08Vein Halo

SB-2026-008370.20371.000.800.01Vein Halo

SB-2026-008371.00371.700.700.01Vein Halo

SB-2026-008371.70372.200.5016.5055HW Vein

SB-2026-008372.20372.750.557.8055HW Vein

UB-2026-001ANo Significant intercept

UB-2026-002No Significant intercept

UB-2026-003No Significant intercept

UB-2026-004No Significant intercept

UB-2026-00550.8051.550.750.01Vein Halo

UB-2026-00551.5552.100.556.33BK Vein

UB-2026-00552.1053.000.900.01Vein Halo

UB-2026-00620.5522.001.450.11Vein Halo

UB-2026-00622.0022.600.605.16BK Vein

UB-2026-00622.6023.350.751.61Vein Halo

UB-2026-00731.4032.200.805.47BK Vein

UB-2026-00732.2033.000.804.59BK Vein

UB-2026-00733.0033.700.701.85BK Vein

UB-2026-00831.0531.850.8021.60BK Vein

UB-2026-00831.8532.350.500.20Vein Halo

UB-2026-00832.3533.100.750.20Vein Halo

UB-2026-009No Significant intercept

UB-2026-010No Significant intercept

UB-2026-011203.60204.100.505.95King Vein

UB-2026-011204.10204.600.500.32King Vein

UB-2026-011204.60205.601.000.01Vein Halo

UB-2026-01237.0037.750.750.36Vein Halo

UB-2026-01237.7538.720.970.87BK Vein

UB-2026-01238.7239.600.8830.70BK Vein

UB-2026-01378.0079.001.0022.40BK Vein

UB-2026-01379.0080.001.0022.50BK Vein

UB-2026-01380.0081.001.005.25BK Vein

UB-2026-01394.0094.500.503.54Vein Halo

UB-2026-01394.5095.450.953.79Vein Halo

UB-2026-01395.4596.250.8013.00C4 Vein

UB-2026-014No Significant intercept

UB-2026-01520.4020.900.500.77Vein Halo

UB-2026-01520.9021.400.509.18Untargeted Vein

UB-2026-01521.4022.150.750.03Vein Halo

UB-2026-01547.9048.800.909.34BK Vein

UB-2026-01548.8050.001.200.02Vein Halo

UB-2026-016No Significant intercept

UB-2026-01764.3564.950.606.14BK-9870 Vein

UB-2026-01764.9565.450.502.49BK-9870 Vein

UB-2026-01765.4566.000.551.11BK-9870 Vein

UB-2026-01766.0066.500.501.48BK-9870 Vein

UB-2026-01766.5067.000.501.90BK-9870 Vein

Note: the bolded assay samples in this table have been used for the composite assay values and intervals reported in the Highlights section above. True thickness of structures in this release may range from 34% to 95% of the apparent thicknesses.

Bralorne Gold Project – Drill Collar Locations Table (values rounded to nearest meter)

Drill Hole NameUTM Easting

UTM Northing

Elevation (m)

SB-2026-00151375856250051247

SB-2026-00251375856250051248

SB-2026-00351375856250051247

SB-2026-00451375856250051248

SB-2026-00551375856250061247

SB-2026-00651375856250051247

SB-2026-00751375856250051247

SB-2026-00851375856250051248

UB-2026-001A51346856254251062

UB-2026-00251346856254261060

UB-2026-00351346856254261059

UB-2026-00451346856254261058

UB-2026-00551346856254271060

UB-2026-00651346756254271059

UB-2026-00751346756254271059

UB-2026-00851346556254271059

UB-2026-00951346656254271060

UB-2026-01051346656254271062

UB-2026-01151346856254261061

UB-2026-01251346856254261061

UB-2026-01351346456254271060

UB-2026-01451346456254261059

UB-2026-01551346356254251060

UB-2026-01651346356254241058

UB-2026-01751346256254251060

Bralorne Gold Project – Drill Collar Orientations Table (negative dip points down from the horizontal)

Drill Hole NameAzimuth (o)Dip (o)Total Depth (m)

SB-2026-001225.00-50.00410.50

SB-2026-002228.50-45.00402.00

SB-2026-003221.00-50.00402.00

SB-2026-004216.50-51.50402.00

SB-2026-005221.00-53.00402.00

SB-2026-006205.80-56.70392.40

SB-2026-007175.00-46.00375.00

SB-2026-008218.50-55.00402.60

UB-2026-001A75.0030.00126.00

UB-2026-00260.000.0093.00

UB-2026-00359.00-28.0075.00

UB-2026-00450.00-60.0075.00

UB-2026-00540.00-4.0075.00

UB-2026-00635.00-38.0063.00

UB-2026-00735.00-38.0060.00

UB-2026-008337.00-35.0075.00

UB-2026-00918.00-5.00225.00

UB-2026-0108.0042.00120.00

UB-2026-0110.00-4.00231.00

UB-2026-012320.00-10.0075.00

UB-2026-013299.00-45.00111.00

UB-2026-014295.00-15.0075.00

UB-2026-015336.00-60.0072.00

UB-2026-016293.00-30.50111.00

UB-2026-017342.00-24.00177.00

Complete collar coordinates with collar orientations, and all gold assay results from publicly released 2026 drill holes are now available on the Company’s website.

For further information, please contact:

Lindsay Dunlop

Vice President, Investor Relations

lindsay.dunlop@taliskerresources.com

+1 647 274 8975

Qualified Person

The technical information contained in this news release has been reviewed and approved by Kyle Orr, P.Geo., Talisker’s Vice President Exploration, who is a Qualified Person as defined under Canadian National Instrument 43-101, Standards of Disclosure for Mineral Projects. Mr. Orr is not independent of the Company in accordance with NI 43-101.

About Talisker Resources Ltd.

Talisker (taliskerresources.com) is a junior resource company involved in the exploration and development of gold projects in British Columbia, Canada. Talisker’s flagship asset is the high-grade, fully permitted Bralorne Gold Project where the Company is producing at the Mustang Mine. Talisker projects also include the Ladner Gold Project, an advanced stage project with significant exploration potential from an historical high-grade producing gold mine and the Spences Bridge Project where the Company has a significant landholding in the emerging Spences Bridge Gold Belt, and several other early-stage Greenfields projects.

Sample Preparation and QAQC

Drill core in this new release from the Bralorne Gold Project was drilled in NQ size (47.6mm) or HQ size (63.5mm). Drill core samples are a minimum of 50 cm and a maximum of 150 cm long along the core axis. Samples are focused on an interval of interest, such as a vein or zone of mineralization. Shoulder samples bracket the interval of interest such that a total sampled core length of not less than 3m both above and below the interval of interest must be assigned. Sample QAQC measures of unmarked certified reference materials (CRMs), blanks, and duplicates are inserted into the sample sequence and makeup 10% of the samples submitted to the lab for holes reported in this release. Actlabs performs sample preparation and analyses in Kamloops, British Columbia. Drill core sample preparation includes drying in an oven, crushing of the sample up to 80% passing 2 mm, sample splitting using a riffle splitter, and pulverizing a 1,000 g split to 95% passing 105 microns (ACT code RX1+1000). Gold in diamond drill core is analyzed by fire assay and atomic absorption spectroscopy (AAS) of a 50g sample (ACT code 1A2-50-ORE). Gold assay technique 1A2-50-ORE has an upper detection limit of 100 ppm. Any sample that produces an over-limit gold value via the gold assay technique is sent for gravimetric finish (ACT method 1A3-50) which has an upper detection limit of 10,000 ppm Au. Where asymmetrically distributed native gold mineralization is observed by the core logging geologist, a “cut-line” may be drawn along the length of the core to guide the core cutter to evenly bisect that mineralization thereby helping to ensure a representative sample. Where no sample cut line is drawn by the geologist the standard procedure is to preserve the oriented core “backside line” or “bottom of hole” mark in the core box. Duplicates were sampled by taking a ¼ core primary sample and a ¼ core as the duplicate sample, thereby leaving a ½ core representative sample in the box. A photo archive exists for all core from before sampling.

Caution Regarding Forward Looking Statements

Certain statements contained in this press release constitute forward-looking information. The use of any of the words “could”, “intend”, “expect”, “believe”, “will”, “projected”, “estimated” and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on Talisker’s current belief or assumptions as to the outcome and timing of such future events. Various assumptions or factors are typically applied in drawing conclusions or making the forecasts or projections set out in forward-looking information. Those assumptions and factors are based on information currently available to Talisker. Although such statements are based on reasonable assumptions of Talisker’s management, there can be no assurance that any conclusions or forecasts will prove to be accurate.

Forward looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions, access and supply risks, reliance on key personnel, operational risks, regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks, title and environmental risks and risks relating to the failure to receive all requisite shareholder and regulatory approvals.

The forward-looking information contained in this release is made as of the date hereof, and Talisker is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.

A Media Snippet accompanying this announcement is available by clicking on this link.