press release

Talamore Reports Additional High-Grade Assays from Supremo Extension

2026-10-07

TSX - Toronto Stock Exchange · Drill Results

Results include 9.72 g/t Au over 7.2 m in hole 26-SPX-RC135 and 9.68 g/t Au over 3.9 m in hole 26-SPX-RC111, supporting resource upgrade and conversion within the pit limits

Vancouver, British Columbia--(Newsfile Corp. - October 7, 2026) - Talamore Mining Corporation (TSX: TALA) (OTCQB: TALMF) ("Talamore" or the "Company") is pleased to report results from 40 holes of an ongoing 40,000-metre infill and exploration drilling program at its wholly-owned Coffee Gold project in Canada's Yukon Territory. Drilling is currently targeting the higher-grade Supremo Extension zone (Figures 1 & 2), which currently hosts an Indicated Resource of 2,437 kt at a grade of 1.18 grams per tonne (g/t) gold for a contained 92,000 ounces of gold, and an Inferred Resource of 6,059 kt at a grade of 1.72 g/t gold for a contained 335,000 ounces of gold. The Inferred grade at Supremo Extension is significantly higher than the 1.15 g/t Au grade of the overall Coffee Gold project resource estimate and thus provides a compelling target for converting high-grade ounces to the Indicated category for inclusion in the Feasibility Study currently underway.

Today's release includes assay results from 38 reverse circulation and 2 diamond drill holes totalling 5,250 metres of a planned 25,000 metres of infill drilling at Supremo Extension. The infill drilling program is intended to upgrade resources for the upcoming Feasibility Study and represents only a portion of the broader 40,000-metre program for the property. In total 298 drill holes have been completed for approximately 46,172 metres through September of this year, with results for 140 holes totaling 19,014 metres released to date.

Drilling Highlights

Highlights of the holes reported here from the Supremo Extension structural system include:

9.72 g/t Au over 7.2 mestimated true width (ETW) in hole 26-SPX-RC135 9.68 g/t Au over 3.9 mETW in hole 26-SPX-RC111 6.26 g/t Au over 5.8 mETW in hole 26-SPX-RC127 4.04 g/t Au over 15.2 mETW in hole 26-SPX-RC123 2.41 g/t Au over 20.0 mETW in hole 26-SPX-RC122 1.53 g/t Au over 23.0 m ETW in hole26-SPX-RC057

Tim Warman, President and CEO of Talamore Mining, commented, "These latest results were received just prior to the cut-off date for the updated resource estimate that will underpin the feasibility study currently underway. The results provide confirmation of the grade, continuity and resource growth potential we see at Supremo Extension, with results materially above current resource grades, in some cases extending beyond the limits of the existing resource pit. As we advance Coffee toward a construction decision, results like these reinforce our view that Supremo Extension will be an important part of the Coffee gold project."

Geology and Context of Results

The Coffee Gold project consists of multiple mineralized structural zones forming the equivalent of a large vein swarm with individual structural zones from one to over thirty metres in width and extending up to four-kilometres in strike length (Figure 1). The Supremo Extension portion of the Coffee deposit is at the intersection of a steeply dipping northeasterly trending high-grade structure and a shallower east-dipping structural zone. The shallow dipping structure is unique relative to the other structural zones in the Coffee deposit because of the much thicker mineralization, lower trace metal concentrations and higher silver content. The intersection of these two structural trends creates wide zones of much higher-than-average grade that become ideal for open pit mining.

Hole 26-SPX-RC135(Figures 2 & 3) encountered much better than expected grade on the steeply dipping structure in Supremo Extension. This hole is the most southwestern hole reported from the 2026 program and will likely add mineralization within the current resource pit, with mineralization remaining open at depth. Assays are pending on three drill holes on this section, which should add continuity to the main mineralized structures and define the bottom of the pit. Hole26-SPX-RC123 (Figure 2 & 4) expands higher grade material on the shallow dipping structure towards the surface. Hole 26-SPX-RC123 also shows strong grades at depth on the structure, but the intercept is predominantly sulphide in nature. Hole 26-SPX-RC127(Figures 2 & 5) helps to confirm the current resource model interpretation and shows good grade at the base of the pit, which may support an expansion of the pit at depth. Hole 26-SPX-RC122(Figures 2 & 6) is a shallow hole that confirms near-surface grade and width on the shallow dipping vein. Assays are pending on one drill hole deeper on this section to confirm the model near the base of the pit. These drill results in the low angle structure should increase the block grades and gold ounces in this part of the vein structure. Hole 26-SPX-RC057(Figures 2 & 7) is another shallow hole that adds better grade and width to the shallow-dipping vein, likely increasing the block grade in this part of the structure.

These 40 drill holes continue the campaign to infill between existing completed cross sections on the Supremo Extension target, to increase drill density and upgrade resources from Inferred to Indicated for inclusion in the Feasibility Study currently underway. Infill and/or expansion drilling has also started on the Supremo and Latte zones, as well as testing of outlying targets including Sugar and Konnexion.

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_001full.jpg)

Figure 1.Known mineralized systems and existing drill holes at the Coffee Gold Project. Resource pit outlines in Figures 1 through 7 are based on the report entitled "NI 43-101 Technical Report for the 2025 Mineral Resource Estimate Update on the Coffee Gold Project, Yukon, Canada" prepared for Fuerte Metals Corporation by Micon International, with an effective date of August 21, 2025, and an issue date of October 6, 2025.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_001full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_002full.jpg)

Figure 2.Location of drill holes and cross-sections from the current release, Supremo Extension.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_002full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_003full.jpg)

Figure 3. Cross-section E-E' through the Supremo Extension showing high-grade in the deepest drill hole to date on this section of the steeply dipping vein. Results for several additional holes from further down the structure are still pending.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_003full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_004full.jpg)

Figure 4.Cross-section C-C' through the Supremo Extension showing high-grade continuity of intercepts within the shallower eastward-dipping mineralized structure, adding confidence to the existing model and opportunity to upgrade the resource classification in this area.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_004full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_005full.jpg)

Figure 5.Cross-section D-D' through the Supremo Extension showing high grade at the base of the pit and near surface grade and width on the shallow eastward-dipping structure for increased potential for pit expansion.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_005full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_006full.jpg)

Figure 6.Cross-section B-B' through the Supremo Extension showing increasing near-surface width and grade.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_006full.jpg

[](https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_007full.jpg)

Figure 7.Cross-section A-A' through the Supremo Extension showing increasing near-surface width and grade.

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7505/317797_e1a94a7f746929e6_007full.jpg

Table 1.Detailed Drill results

| Drill Hole | From (m) | To (m) | Drilled Width (m) | True Width (m) | Au (ppm) | Zone | | 26-SPX-DD012 | 160.0 | 170.8 | 10.8 | 7.4 | 4.38 | Supremo Extension | | 26-SPX-DD013 | 172.0 | 179.5 | 7.5 | 4.4 | 4.01 | Supremo Extension | | 26-SPX-RC005 | 48.8 | 59.4 | 10.7 | 9.8 | 3.06 | Supremo Extension | | 26-SPX-RC006 | 16.8 | 25.9 | 9.2 | 8.2 | 1.68 | Supremo Extension | | 26-SPX-RC006 | 33.5 | 39.6 | 6.1 | 6.0 | 1.04 | Supremo Extension | | 26-SPX-RC006 | 91.4 | 117.4 | 25.9 | 24.8 | 0.60 | Supremo Extension | | 26-SPX-RC014 | 9.1 | 18.3 | 9.2 | 8.3 | 0.74 | Supremo Extension | | 26-SPX-RC016 | 16.8 | 22.9 | 6.1 | 5.3 | 0.76 | Supremo Extension | | 26-SPX-RC016 | 67.1 | 77.7 | 10.7 | 6.5 | 1.05 | Supremo Extension | | 26-SPX-RC043 | 22.9 | 41.2 | 18.3 | 16.3 | 1.40 | Supremo Extension | | 26-SPX-RC043 | 59.4 | 71.6 | 12.2 | 9.3 | 1.00 | Supremo Extension | | 26-SPX-RC043 | 80.8 | 89.9 | 9.2 | 6.1 | 1.05 | Supremo Extension | | 26-SPX-RC043 | 100.6 | 108.2 | 7.6 | 4.1 | 0.94 | Supremo Extension | | 26-SPX-RC043 | 128.0 | 146.3 | 18.3 | 8.5 | 0.39 | Supremo Extension | | 26-SPX-RC044 | 118.9 | 131.1 | 12.2 | 11.1 | 1.63 | Supremo Extension | | 26-SPX-RC048 | 114.3 | 129.5 | 15.2 | 12.5 | 1.93 | Supremo Extension | | 26-SPX-RC049 | 6.1 | 35.1 | 29.0 | 13.4 | 1.52 | Supremo Extension | | 26-SPX-RC049 | 41.2 | 47.2 | 6.1 | 2.9 | 2.35 | Supremo Extension | | 26-SPX-RC049 | 56.4 | 68.6 | 12.2 | 7.0 | 0.68 | Supremo Extension | | 26-SPX-RC049 | 91.4 | 100.6 | 9.1 | 5.2 | 1.84 | Supremo Extension | | 26-SPX-RC052 | 36.6 | 39.6 | 3.0 | 2.7 | 0.67 | Supremo Extension | | 26-SPX-RC053 | 50.3 | 54.9 | 4.6 | 2.9 | 3.19 | Supremo Extension | | 26-SPX-RC057 | 27.4 | 54.9 | 27.4 | 23.0 | 1.53 | Supremo Extension | | 26-SPX-RC057 | 64.0 | 68.6 | 4.6 | 3.5 | 6.92 | Supremo Extension | | 26-SPX-RC057 | 91.4 | 97.5 | 6.1 | 3.0 | 0.73 | Supremo Extension | | 26-SPX-RC059 | 111.3 | 117.4 | 6.1 | 5.4 | 5.36 | Supremo Extension | | 26-SPX-RC060 | 144.8 | 160.0 | 15.2 | 8.6 | 1.12 | Supremo Extension | | 26-SPX-RC065 | 114.3 | 123.4 | 9.1 | 8.0 | 4.46 | Supremo Extension | | 26-SPX-RC066 | 89.9 | 97.5 | 7.6 | 7.1 | 4.06 | Supremo Extension | | 26-SPX-RC090 | 18.3 | 21.3 | 3.1 | 2.8 | 0.95 | Supremo Extension | | 26-SPX-RC093 | 137.2 | 144.8 | 7.6 | 5.1 | 5.60 | Supremo Extension | | 26-SPX-RC098 | 35.1 | 36.6 | 1.5 | 1.4 | 6.17 | Supremo Extension | | 26-SPX-RC108 | 29.0 | 39.6 | 10.7 | 9.8 | 2.06 | Supremo Extension | | 26-SPX-RC111 | 91.4 | 100.6 | 9.1 | 7.4 | 0.94 | Supremo Extension | | 26-SPX-RC111 | 150.9 | 155.5 | 4.6 | 3.9 | 9.68 | Supremo Extension | | 26-SPX-RC116 | 13.7 | 21.3 | 7.6 | 6.6 | 2.03 | Supremo Extension | | 26-SPX-RC117 | 16.8 | 27.4 | 10.7 | 9.9 | 0.69 | Supremo Extension | | 26-SPX-RC117 | 35.1 | 38.1 | 3.1 | 2.7 | 1.38 | Supremo Extension | | 26-SPX-RC120 | 41.2 | 42.7 | 1.5 | 1.2 | 0.39 | Supremo Extension | | 26-SPX-RC121 | 68.6 | 73.2 | 4.6 | 2.0 | 1.58 | Supremo Extension | | 26-SPX-RC122 | 68.6 | 89.9 | 21.3 | 20.0 | 2.41 | Supremo Extension | | 26-SPX-RC123 | 82.3 | 100.6 | 18.3 | 15.2 | 4.04 | Supremo Extension | | 26-SPX-RC125 | 48.8 | 59.4 | 10.7 | 9.4 | 0.97 | Supremo Extension | | 26-SPX-RC126 | 93.0 | 96.0 | 3.1 | 2.5 | 0.65 | Supremo Extension | | 26-SPX-RC127 | 111.3 | 121.9 | 10.7 | 5.8 | 6.26 | Supremo Extension | | 26-SPX-RC131 | 146.3 | 157.0 | 10.7 | 5.1 | 3.44 | Supremo Extension | | 26-SPX-RC134 | 42.7 | 48.8 | 6.1 | 5.6 | 1.05 | Supremo Extension | | 26-SPX-RC135 | 65.5 | 79.3 | 13.7 | 7.2 | 9.72 | Supremo Extension | | 26-SPX-RC136 | 45.7 | 65.5 | 19.8 | 18.3 | 0.72 | Supremo Extension | | 26-SPX-RC137 | 59.4 | 67.1 | 7.6 | 6.3 | 1.63 | Supremo Extension | | 26-SPX-RC138 | 143.3 | 158.5 | 15.2 | 6.9 | 4.34 | Supremo Extension | | 26-SPX-RC153 | 121.9 | 123.4 | 1.5 | 1.1 | 0.95 | Supremo Extension | | 26-SPX-RC194 | 166.1 | 170.7 | 4.6 | 3.6 | 3.24 | Supremo Extension | | 26-SPX-RC201 | 164.6 | 169.2 | 4.6 | 4.0 | 1.59 | Supremo Extension |

Table 2.Drill Hole Locations

| Drill Hole | Easting | Northing | Elevation (masl) | Azimuth | Dip | Hole Depth (m) | | 26-SPX-DD012 | 583942 | 6975881 | 919 | 135 | 62 | 224 | | 26-SPX-DD013 | 583915 | 6975839 | 919 | 134 | 73 | 238 | | 26-SPX-RC005 | 584226 | 6975953 | 931 | 134 | 46 | 102 | | 26-SPX-RC006 | 584226 | 6975952 | 931 | 352 | 45 | 171 | | 26-SPX-RC014 | 584175 | 6975974 | 927 | 358 | 63 | 151 | | 26-SPX-RC016 | 584166 | 6976016 | 914 | 321 | 45 | 139 | | 26-SPX-RC043 | 584070 | 6975962 | 930 | 308 | 46 | 186 | | 26-SPX-RC044 | 584073 | 6975960 | 930 | 142 | 50 | 201 | | 26-SPX-RC048 | 584050 | 6975919 | 937 | 148 | 51 | 146 | | 26-SPX-RC049 | 584040 | 6975999 | 915 | 310 | 44 | 120 | | 26-SPX-RC052 | 584027 | 6975794 | 955 | 135 | 44 | 70 | | 26-SPX-RC053 | 584026 | 6975791 | 955 | 134 | 75 | 82 | | 26-SPX-RC057 | 584017 | 6975949 | 925 | 315 | 45 | 101 | | 26-SPX-RC059 | 584000 | 6975884 | 932 | 135 | 46 | 146 | | 26-SPX-RC060 | 583998 | 6975886 | 932 | 134 | 66 | 201 | | 26-SPX-RC065 | 583991 | 6975878 | 931 | 142 | 52 | 160 | | 26-SPX-RC066 | 583992 | 6975880 | 931 | 316 | 51 | 151 | | 26-SPX-RC090 | 583903 | 6975930 | 899 | 323 | 48 | 70 | | 26-SPX-RC093 | 583898 | 6975788 | 924 | 148 | 71 | 184 | | 26-SPX-RC098 | 583870 | 6975903 | 897 | 320 | 45 | 91 | | 26-SPX-RC108 | 583842 | 6975893 | 889 | 321 | 45 | 81 | | 26-SPX-RC111 | 583821 | 6975763 | 902 | 308 | 60 | 181 | | 26-SPX-RC116 | 583818 | 6975657 | 920 | 135 | 45 | 50 | | 26-SPX-RC117 | 583816 | 6975891 | 882 | 316 | 43 | 81 | | 26-SPX-RC120 | 583797 | 6975674 | 909 | 135 | 46 | 70 | | 26-SPX-RC121 | 583797 | 6975674 | 909 | 137 | 67 | 81 | | 26-SPX-RC122 | 583798 | 6975826 | 885 | 312 | 51 | 111 | | 26-SPX-RC123 | 583798 | 6975826 | 885 | 292 | 49 | 136 | | 26-SPX-RC125 | 583774 | 6975854 | 874 | 309 | 45 | 120 | | 26-SPX-RC126 | 583770 | 6975708 | 890 | 150 | 45 | 111 | | 26-SPX-RC127 | 583770 | 6975707 | 890 | 150 | 61 | 131 | | 26-SPX-RC131 | 583705 | 6975663 | 908 | 104 | 54 | 169 | | 26-SPX-RC134 | 583711 | 6975612 | 926 | 135 | 44 | 70 | | 26-SPX-RC135 | 583711 | 6975612 | 926 | 134 | 73 | 91 | | 26-SPX-RC136 | 583714 | 6975812 | 846 | 325 | 46 | 81 | | 26-SPX-RC137 | 583715 | 6975812 | 846 | 324 | 76 | 101 | | 26-SPX-RC138 | 583704 | 6975662 | 908 | 116 | 62 | 163 | | 26-SPX-RC153 | 583646 | 6975653 | 904 | 142 | 45 | 140 | | 26-SPX-RC194 | 583838 | 6975821 | 899 | 145 | 57 | 171 | | 26-SPX-RC201 | 584172 | 6975834 | 967 | 13 | 52 | 175 | | Coordinate system NAD83 Zone 7N | | | | | | |

The goal of targeting the higher-grade infill portion within the main Supremo Extension is to increase both the size and the grade of the resource for inclusion in the current Feasibility Study work. The current open-pit mineral resource estimate comprises:

Table 3.2025 Coffee Gold Project Mineral Resource Estimate

| Resource Category | Tonnage (kt) | Gold Grade (g/t) | Metal Content (gold koz) | | Measured | 1,200 | 1.80 | 69 | | Indicated | 78,846 | 1.14 | 2,888 | | Measured + Indicated | 80,046 | 1.15 | 2,957 | | Inferred | 21,200 | 1.17 | 800 |

Notes to Table 3:

1. Economic parameters used in the resource are a gold price of US$2,500/oz; heap leach average recoveries for the individual metallurgical domains of 86.3% for Oxide, 76.0% for Upper Transition, 54.5% for Middle Transition and 31.4% for Lower Transition; a mining cost of C$3.27-$3.50/t, processing costs of C$6.64/t, and general and administrative costs of C$6.0/t. A CAD:USD exchange rate of 1.35 was also assumed. 2. The calculated cut-off grades vary between 0.13 g/t Au and 0.48 g/t Au, depending on the metallurgical domain. The global weighted average cut-off grade is 0.18 g/t Au, with domain tonnage contributions comprising 64% Oxide, 18% Upper Transition, 5% Middle Transition, and 13% Lower Transition. 3. Pit slope angles vary between 45.0 and 48.8 degrees depending on the pit area. 4. Pit optimization was done on 12x12x10 m re-block model with a minimum of 4x4x5 m regularized SMU. 5. Numbers have been rounded to the nearest thousand tonnes and ounces. Differences may occur in totals due to rounding. 6. The mineral resources described above have been prepared in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum Standards and Practices. 7. Messrs. Alan J. San Martin, P.Eng. and Charley Murahwi, P.Geo. from Micon International Limited are the Qualified Person (QP) for this Mineral Resource Estimate. 8. Mineral resources are not mineral reserves as they have not demonstrated economic viability. The quantity and grade of reported mineral resources in this news release are uncertain in nature; however, it is reasonably expected that a significant portion of Inferred Mineral Resources could be upgraded into Indicated Mineral Resources with further exploration. 9. Micon's QPs have not identified any legal, political, environmental, or other factors that could materially affect the potential development of the mineral resource estimate.

Quality Assurance and Quality Control Procedures

Reverse circulation samples are collected at the drill rig by a qualified subcontractor in conjunction with rock chips for logging. Samples are collected every 5 ft (~1.52 m) for the entire hole, with the exception of the first sample of each hole where intervals may be longer depending on recovery while casing is set. Large retention bags (36"x24") are marked with the depth of the interval and small sample bags (12"x 20") are marked with a sample ID corresponding to a sample tag book where depth interval and hole information are recorded. The sample is collected in a clean bucket from under the cyclone. The full sample and bucket are weighed and then the sample is split using a riffle splitter (1/8 split) into a retention bag and a sample bag. The retention and sample bags are weighed on a scale, and the total weight, retention bag weight, and sample bag weight are recorded in the corresponding sample tag book.

A representative spear sample is taken from the waste bucket and is dry and wet sieved on site. Chips from the sieved sample are placed in a chip tray marked with the corresponding depth interval. Retention bags are folded over and are stacked neatly at the drill site; sample bags are closed and arranged into sample shipments at the drill site. A geologist regularly checks in on each drill to ensure sample integrity, quality, and that the site is being maintained in a clean and orderly manner to prevent sampling errors and contamination. When groundwater is encountered, the drillers will attempt to "dry" the interval before it reaches the cyclone. If a sample is wet, the sample will be spear sampled rather than split, and 'wet sample' is noted in the tag book. A geologist will supervise sampling during wet drilling conditions to ensure the sample is representative.

The cyclone is checked regularly for contamination and cleaned as necessary, regardless of drilling conditions. The collected samples are brought to the main core processing area at the end of every shift where they are laid out and the sample count and sequence numbers are checked to verify against the completed tag books.

For diamond drilling, when drilling is underway cores are taken from the core tube and placed into wooden core boxes. No core logging or sampling is completed at the drill rigs. Once the drill core arrives at the core logging facility the geologist and geo-technician inspect every core box to ensure that 3 m interval blocks and box numbering are in the correct order. For oriented core the core is oriented based on the core orientation mark at the end of each 3 m run. The geo-technician then measures each run of core and records the total recovery, rock quality designation (RQD), fracture frequency, number of fractures along foliation, joint roughness, orientation mark quality, and run-on-run consistency (RORC). Using the recovered core length, metre marks are put on the core at 1 m intervals and meterage for each core box are labelled. Drill core losses are assessed and recorded during the logging stage. Once geotechnical and geologic logging have been completed sample intervals are marked and tagged by the logging geologist. Core is then transported to the core cutting facility where it is cut and sampled as per the logging geologists' instructions and procedures.