NeXGold Mining Corp. press release

NexGold Intersects 4.16 g/t Gold over 7.0 Metres, 2.84 g/t Gold over 7.0 Metres and 1.94 g/t Gold over 9.0 Metres in RC Infill Drill Program at the Goldboro Gold Project, Nova Scotia

2026-11-03

TSXV - TSX Venture Exchange · Gold · Silver · Zinc · Copper · Canada · Drill Results

TORONTO, Nov. 03, 2026 (GLOBE NEWSWIRE) -- NexGold Mining Corp. (TSXV: NEXG;OTCQX: NXGCF) (“NexGold” or the “Company”) is pleased to provide additional results from its recently completed detailed Reverse Circulation Infill Drill Program (“RC Infill Drill Program”) at the Company’s Goldboro Gold Project in Nova Scotia (“Goldboro Project”). The RC Infill Drill Program, which consisted of 36,239 metres, was designed to infill specific areas of the Goldboro Mineral Resource within the planned West and East Pits at a nominal drill spacing of 12.5 metres and down to depths of 50 metres (Figures 1 and 2). Results have been received for all drilling within the West Pit of the Goldboro Mineral Resource.

Kevin Bullock, President, CEO & Director of NexGold, commented: “We are pleased to announce the successful completion of the RC Infill Drill Program, which was well executed. Fire assay results from all drill holes completed within the West Pit have been received, while assay results from the East Pit are expected in the coming months.

“The RC Infill Drilling Program was designed to increase confidence in the location, continuity, grade, and thickness of mineralization within the planned open-pit mining areas. Drilling within the West Pit focused primarily on areas scheduled for mining during the initial years of operation. The results from this program, together with those from the East Pit, are expected to support the evaluation of a final investment decision and may be incorporated into future Mineral Resource Estimates beyond those included in the updated Feasibility Study, which is anticipated to be completed later this year.

“As we continue to advance the Project across several key development workstreams, our focus remains on completing the Feasibility Study in 2026 and safely executing early works construction activities on site. Current activities on site include construction of the public access bypass road, installation of sediment and erosion control structures, clearing and preparation of the Employee Accommodations Facility site, development of till and organics stockpiles, construction of sedimentation ponds, and establishment of construction management facilities. These activities represent important milestones as we continue to advance the Goldboro Project toward a construction decision.”

Selected highlights from the most recent results from the RC Infill Drill Program within the West Pit include:

4.16 g/t Au over 7.0 m (from 13.0 m to 20.0 m) including 20.15 g/t Au over 1.0 m (from 14.0 m to 15.0 m) in drill hole RC-26-271; 6.76 g/t Au over 2.0 m (from 14.0 m to 16.0 m) including 12.75 g/t Au over 1.0 m (from 14.0 m to 15.0 m) and 3.11 g/t Au over 4.0 m (from 20.0 m to 24.0 m) in drill hole RC-26-249; 6.46 g/t Au over 3.0 m (from 11.0 m to 14.0 m) including 18.88 g/t Au over 1.0 m (from 13.0 m to 14.0 m) and 2.83 g/t Au over 2.0 m (from 31.0 m to 33.0 m) in drill hole RC-26-273; 2.84 g/t Au over 7.0 m (from 11.0 m to 18.0 m) and 1.55 g/t Au over 2.0 m(from 26.0 m to 28.0 m) in drill hole RC-26-251; 5.11 g/t Au over 3.0 m (from 36.0 m to 39.0 m) and 1.48 g/t Au over 5.0 m(from 11.0 m to 16.0 m) in drill hole RC-26-246; 3.11 g/t Au over 6.0 m (from 11.0 m to 17.0 m) including 13.91 g/t Au over 1.0 m (from 15.0 m to 16.0 m) in drill hole RC-26-293; 1.94 g/t Au over 9.0 m (from 13.0 m to 22.0 m) in drill hole RC-26-290; 1.84 g/t Au over 8.0 m (from 10.0 m to 18.0 m) in drill hole RC-26-279; 2.92 g/t Au over 5.0 m (from 14.0 m to 19.0 m) including 11.29 g/t Au over 1.0 m (from 16.0 m to 17.0 m) from drill hole RC-26-274; and 4.84 g/t Au over 3.0 m (from 10.0 m to 13.0 m) in drill hole RC-26-252.

In addition, selected assay highlights from the West Pit, as previously reported in the Company’s news releases dated June 25, 2026, July 9, 2026 and August 19, 2026, include:

61.22 g/t Au over 12.0 m(from 18.0 m to 30.0 m) including 685.0 g/t over 1.0 m (23.0 to 24.0 m) and including 36.69 g/t over 1.0 m (24.0 to 25.0 m) in drill hole RC-26-073; 12.06 g/t Au over 6.0 m(from 44.0 m to 50.0 m) including 67.41 g/t Au over 1.0 m (47.0 m to 48.0 m) in drill hole RC-26-147; 9.31 g/t Au over 7.0 m(from 25.0 m to 32.0 m) including 63.55 g/t Au over 1.0 m (25.0 m to 26.0 m) in drill hole RC-26-144; 5.83 g/t Au over 13.0 m(from 9.0 m to 22.0 m) including 61.20 g/t Au over 1.0 m (13.0 m to 14.0 m) and 1.55 g/t Au over 4.0 m(from 27.0 m to 31.0 m) in drill hole RC-26-037; 3.72 g/t Au over 13.0 m(from 37.0 m to 50.0 m) including 20.08 g/t Au over 1.0 m (37.0 m to 38.0 m) and 11.83 g/t Au over 1.0 m(from 47.0 m to 48.0 m) in drill hole RC-26-060; 3.84 g/t over 18.0 m (from 30.0 m to 48.0 m) including 28.04 g/t Au over 1.0 m (36.0 m to 37.0 m) and including 15.46 g/t over 1.0 m (43.0 m to 44.0 m) and 1.59 g/t Au over 8.0 m (from 19.0 m to 27.0 m); 4.13 g/t Au over 10.0 m(from 11.0 m to 21.0 m) including 29.03 g/t Au over 1.0 m (15.0 m to 16.0 m) and 3.04 g/t Au over 9.0 m(from 39.0 m to 48.0 m) including 14.49 g/t Au over 1.0 m (from 44.0 m to 45.0 m) and 1.25 g/t Au over 8.0 m(from 25.0 m to 33.0 m) in drill hole RC-26-129; 4.02 g/t Au over 11.0 m(from 27.0 m to 38.0 m), including 33.40 g/t Au over 1.0 m (from 28.0 m to 29.0 m) and 0.98 g/t Au over 5.0 m(from 11.0 m to 16.0 m) in drill hole RC-26-009; 2.04 g/t Au over 19.0 m(from 31.0 m to 50.0 m) including 12.19 g/t Au over 1.0 m (from 46.0 m to 47.0 m) in drill hole RC-26-116; 5.26 g/t Au over 7.0m(from 41.0 m to 48.0 m) including 31.29 g/t Au over 1.0 m (from 44.0 m to 45.0 m) in drill hole RC-26-226; 3.24 g/t Au over 11.0 m(from 36.0 m to 47.0 m) including 11.64 g/t Au over 1.0 m (from 43.0 m to 44.0 m) and 1.97 g/t Au over 8.0 m(from 24.0 m to 32.0 m) in drill hole RC-26-126; 7.08 g/t Au over 5.0 m(from 9.0 m to 14.0 m) including 25.11 g/t Au over 1.0 m (from 9.0 m to 10.0 m) in drill hole RC-26-195; 4.70 g/t Au over 7.0 m(from 31.0 m to 38.0 m) including 11.89 g/t Au over 1.0 m (from 35.0 m to 36.0 m) in drill hole RC-26-138; 10.78 g/t Au over 3.0m(from 33.0 m to 36.0 m) including 13.86 g/t Au over 2.0 m (from 34.0 m to 36.0 m) in drill hole RC-26-122; 6.34 g/t Au over 5.0 m(from 33.0 m to 38.0 m) including 13.32 g/t Au over 2.0 m (from 34.0 m to 36.0 m) in drill hole RC-26-120; 2.82 g/t Au over 11.0 m(from 26.0 m to 37.0 m) including 17.73 g/t Au over 1.0 m (from 27.0 m to 28.0 m) and 4.95 g/t Au over 6.0 m(from 44.0 m to 50.0 m) including 23.78 g/t Au over 1.0 m (from 48.0 m to 50.0 m) in drill hole RC-26-130; 10.23 g/t Au over 3.0 m(from 35.0 m to 38.0 m) including 27.43 g/t Au over 1.0 m (from 35.0 m to 36.0 m) in drill hole RC-26-106; 14.97 g/t Au over 2.0 m(from 38.0 m to 40.0 m) including 29.62 g/t Au over 1.0 m (from 39.0 m to 40.0 m) and 0.90 g/t Au over 11.0 m(from 25.0 m to 36.0 m) in drill hole RC-26-163; 1.65 g/t Au over 20.0 m(from 28.0 m to 48.0 m) in drill hole RC-26-146; and 5.73 g/t Au over 5.0 m(from 39.0 m to 44.0 m) including 13.78 g/t Au over 1.0 m (from 42.0 m to 43.0 m) in drill hole RC-26-028.

The high-density RC Infill Drill Program targets areas of the Goldboro Project associated with the initial years of the current mine plan and that are presently accessible for drilling. The objective of the program, and the rationale for using Reverse Circulation (“RC”) drilling, is to obtain a high-density data set that may support future evaluation of the Mineral Resource for potential classification upgrades from the Indicated to Measured category, using a drilling technique that more closely approximates production drilling and associated dilution. The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill data to support planning and evaluation of the initial years of mining contemplated in the current mine plan.

Drill results reported in this news release comprise 2,885 metres of drilling completed in 76 RC drill holes (RC-26-001, RC-26-230 to RC-26-253, RC-26-259 to RC-26-260, RC-26-262 to RC-26-309, and RC-26-581) within the West Pit area (Table 1). In addition, assay highlights from selected drill holes across the West Pit are presented to summarize key results from the RC Infill Drill Program.

Based on the Company's QA/QC protocols, comparison with historical drilling results, and ongoing geological interpretation, the results are considered consistent with the Company's current understanding of the Goldboro Deposit. The drilling intersected mineralization in accordance with the existing geological model and provided enhanced definition of mineralized zones through increased drill density.

Results demonstrate grade and thickness comparable to those encountered in diamond drill intersections within the same area, which were previously drilled at wider spacing. This relationship is illustrated on vertical cross-sections AE through AL (Figure 3). A complete summary of significant gold intersections is provided below (Table 2).

The results of the RC Infill Drill Program may support a future evaluation of the Mineral Resource for potential classification upgrades from the Indicated to Measured category, subject to future geological modelling, estimation, and classification work. The program utilized a drilling methodology designed to more closely approximate anticipated drilling spacing required for greater confidence and provide additional information relevant to the assessment of mining dilution and mineralization continuity.

Any future Mineral Resource Estimate incorporating the results of the RC Infill Drill Program will be completed separately from the ongoing updated Feasibility Study. As the updated Feasibility Study is anticipated to be completed later in 2026, and analytical results from portions of the RC Infill Drill Program remain outstanding, these results will not be incorporated into the Mineral Resource Estimate supporting the updated Feasibility Study.

The Company previously filed a technical report for the Goldboro Project prepared by Nordmin Engineering Ltd., entitled "NI 43-101 Technical Report and Feasibility Study for the Goldboro Gold Project, Eastern Goldfields District, Nova Scotia", with an effective date of December 16, 2021, and a report date of January 11, 2022 (the "2021 Feasibility Study"). The report is available under the Company's profile on SEDAR+ at www.sedarplus.caand on the Company's website at www.nexgold.com.

Figure 1.Map showing the Goldboro Project location and the planned drill hole locations for the current RC Infill Drill Program relative to the initial years of mining contemplated in the 2021 Feasibility Study.

Figure 2.A map showing the location of drill holes reported in this news release and the associated cross sections relative to planned early-years of mining as reported in the 2021 Feasibility Study.

Figure 3.Vertical north-south cross sections (AE-AL) looking east showing drill holes for the RC Infill Drill Program reported in this news release. The cross sections correspond to the section lines shown in Figure 2. Areas along the section lines without drill holes represent portions of the deposit that are not currently accessible to drilling due to historical workings or surface access constraints. These areas are expected to be drilled in the future when they become accessible.

Table 1.RC Infill Drill Program collar information table for drill holes reported in this news release.

| Drill Hole ID1 | Easting (m)2 | Northing (m)2 | Mine Elevation (m) | Azimuth (degrees) | Inclination (degrees) | Depth (m) | | RC-26-001 | 606811.4 | 5006367.7 | 5001.2 | 0 | -90 | 30 | | RC-26-230 | 606723.5 | 5006405.4 | 5001.7 | 0 | -90 | 29 | | RC-26-231 | 606723.5 | 5006417.9 | 5000.1 | 0 | -90 | 29 | | RC-26-232 | 606723.7 | 5006430.0 | 4999.6 | 0 | -90 | 41 | | RC-26-233 | 606723.6 | 5006442.3 | 4999.7 | 0 | -90 | 44 | | RC-26-234 | 606723.9 | 5006455.1 | 4999.6 | 0 | -90 | 44 | | RC-26-235 | 606735.9 | 5006454.9 | 5000.0 | 0 | -90 | 44 | | RC-26-236 | 606736.1 | 5006442.5 | 4999.8 | 0 | -90 | 44 | | RC-26-237 | 606736.0 | 5006430.3 | 4999.8 | 0 | -90 | 40 | | RC-26-238 | 606736.3 | 5006417.4 | 5000.7 | 0 | -90 | 38 | | RC-26-239 | 606735.9 | 5006405.3 | 5002.3 | 0 | -90 | 35 | | RC-26-240 | 606748.5 | 5006405.1 | 5002.1 | 0 | -90 | 39 | | RC-26-241 | 606748.6 | 5006417.6 | 5001.2 | 0 | -90 | 39 | | RC-26-242 | 606748.4 | 5006430.2 | 5000.1 | 0 | -90 | 50 | | RC-26-243 | 606748.4 | 5006442.8 | 4999.8 | 0 | -90 | 50 | | RC-26-244 | 606762.0 | 5006441.7 | 4999.2 | 0 | -90 | 50 | | RC-26-245 | 606760.7 | 5006428.8 | 4999.9 | 0 | -90 | 50 | | RC-26-246 | 606760.9 | 5006417.7 | 5001.1 | 0 | -90 | 39 | | RC-26-247 | 606761.0 | 5006405.0 | 5002.0 | 0 | -90 | 38 | | RC-26-248 | 606761.1 | 5006392.4 | 5002.0 | 0 | -90 | 45 | | RC-26-249 | 606773.7 | 5006392.5 | 5001.8 | 0 | -90 | 50 | | RC-26-250 | 606736.1 | 5006398.1 | 5002.7 | 180 | -80 | 33 | | RC-26-251 | 606760.8 | 5006386.0 | 5001.5 | 180 | -80 | 50 | | RC-26-252 | 606750.2 | 5006392.7 | 5002.2 | 0 | -90 | 41 | | RC-26-253 | 606723.4 | 5006398.5 | 5002.6 | 180 | -70 | 26 | | RC-26-259 | 606723.5 | 5006379.9 | 5002.8 | 0 | -90 | 32 | | RC-26-260 | 606735.9 | 5006380.1 | 5002.7 | 0 | -90 | 37 | | RC-26-262 | 606773.4 | 5006405.2 | 5001.5 | 0 | -90 | 45 | | RC-26-263 | 606773.6 | 5006417.7 | 5000.3 | 0 | -90 | 50 | | RC-26-264 | 606773.7 | 5006430.4 | 4999.5 | 0 | -90 | 37 | | RC-26-265 | 606774.0 | 5006442.4 | 4998.7 | 0 | -90 | 35 | | RC-26-266 | 606773.5 | 5006455.6 | 4998.9 | 0 | -90 | 25 | | RC-26-267 | 606785.7 | 5006417.6 | 4999.7 | 0 | -90 | 35 | | RC-26-268 | 606786.0 | 5006430.3 | 4999.0 | 0 | -90 | 29 | | RC-26-269 | 606786.0 | 5006443.5 | 4998.6 | 0 | -90 | 27 | | RC-26-270 | 606786.2 | 5006455.2 | 4998.6 | 0 | -90 | 26 | | RC-26-271 | 606785.9 | 5006410.9 | 4999.8 | 180 | -80 | 37 | | RC-26-272 | 606778.5 | 5006392.7 | 5001.2 | 90 | -80 | 37 | | RC-26-273 | 606798.6 | 5006392.7 | 4999.9 | 0 | -90 | 35 | | RC-26-274 | 606798.5 | 5006405.2 | 4999.5 | 0 | -90 | 33 | | RC-26-275 | 606798.7 | 5006417.7 | 4999.0 | 0 | -90 | 30 | | RC-26-276 | 606798.7 | 5006430.6 | 4998.6 | 0 | -90 | 30 | | RC-26-277 | 606798.4 | 5006442.4 | 4998.6 | 0 | -90 | 27 | | RC-26-278 | 606798.4 | 5006454.9 | 4998.4 | 0 | -90 | 26 | | RC-26-279 | 606810.9 | 5006393.2 | 4999.1 | 0 | -90 | 33 | | RC-26-280 | 606811.0 | 5006405.2 | 4999.0 | 0 | -90 | 31 | | RC-26-281 | 606811.2 | 5006417.1 | 4998.9 | 0 | -90 | 30 | | RC-26-282 | 606811.0 | 5006430.1 | 4998.6 | 0 | -90 | 30 | | RC-26-283 | 606811.0 | 5006373.7 | 5000.4 | 0 | -80 | 33 | | RC-26-284 | 606811.0 | 5006355.2 | 5001.3 | 0 | -90 | 25 | | RC-26-285 | 606798.5 | 5006342.8 | 5002.1 | 0 | -90 | 25 | | RC-26-286 | 606798.4 | 5006355.0 | 5001.4 | 0 | -90 | 35 | | RC-26-287 | 606798.3 | 5006361.8 | 5000.9 | 180 | -80 | 35 | | RC-26-288 | 606798.3 | 5006366.7 | 5000.8 | 0 | -67 | 35 | | RC-26-289 | 606785.9 | 5006369.2 | 5000.6 | 0 | -70 | 40 | | RC-26-290 | 606786.0 | 5006367.2 | 5000.8 | 0 | -90 | 37 | | RC-26-291 | 606786.4 | 5006355.5 | 5001.5 | 0 | -90 | 38 | | RC-26-292 | 606786.4 | 5006342.8 | 5001.5 | 0 | -90 | 38 | | RC-26-293 | 606773.3 | 5006342.8 | 5001.5 | 0 | -90 | 37 | | RC-26-294 | 606773.5 | 5006355.1 | 5002.1 | 0 | -90 | 38 | | RC-26-295 | 606773.5 | 5006361.2 | 5001.7 | 0 | -80 | 40 | | RC-26-296 | 606773.3 | 5006363.2 | 5001.6 | 0 | -60 | 46 | | RC-26-297 | 606761.2 | 5006342.5 | 5001.3 | 0 | -90 | 39 | | RC-26-298 | 606761.1 | 5006354.9 | 5001.5 | 0 | -90 | 40 | | RC-26-299 | 606761.0 | 5006361.5 | 5001.4 | 0 | -80 | 46 | | RC-26-300 | 606748.4 | 5006342.8 | 5001.4 | 0 | -90 | 45 | | RC-26-301 | 606748.9 | 5006355.3 | 5001.7 | 0 | -90 | 46 | | RC-26-302 | 606747.8 | 5006360.9 | 5001.5 | 0 | -80 | 46 | | RC-26-303 | 606736.0 | 5006356.6 | 5001.6 | 0 | -70 | 40 | | RC-26-304 | 606735.9 | 5006355.0 | 5001.4 | 0 | -90 | 46 | | RC-26-305 | 606735.9 | 5006342.8 | 5001.1 | 0 | -90 | 46 | | RC-26-306 | 606724.1 | 5006338.3 | 5001.9 | 180 | -80 | 46 | | RC-26-307 | 606723.5 | 5006342.7 | 5001.4 | 0 | -90 | 46 | | RC-26-308 | 606723.2 | 5006353.6 | 5002.8 | 0 | -90 | 46 | | RC-26-309 | 606723.4 | 5006355.0 | 5001.8 | 0 | -70 | 40 | | RC-26-581 | 606748.5 | 5006398.4 | 5002.2 | 0 | -90 | 36 |

1. Drill Holes RC-26-002 to -229, -254 to -259, -261, -310 to -323 were presented in news releases dated June 25, 2026, July 7, 2026, and August 19, 2026, respectively. Assays are pending for all remaining drill holes not listed here and will be reported in future news releases. 2. Collar coordinates are Universal Transverse Mercator, North American Datum 1983.

Table 2.Significant drill assay highlights from the RC Infill Drill Program.

| Drill Hole ID3 | From (m) | To (m) | Interval (m)4 | Au (g/t) | | RC-26-001 | 14.0 | 18.0 | 4.0 | 1.99 | | and | 21.0 | 26.0 | 5.0 | 1.09 | | and | 27.0 | 28.0 | 1.0 | 2.43 | | RC-26-231 | 13.0 | 14.0 | 1.0 | 2.85 | | RC-26-232 | 33.0 | 35.0 | 2.0 | 3.13 | | RC-26-233 | 24.0 | 29.0 | 5.0 | 0.80 | | and | 32.0 | 33.0 | 1.0 | 1.06 | | RC-26-234 | 9.0 | 10.0 | 1.0 | 0.63 | | RC-26-235 | 10.0 | 12.0 | 2.0 | 2.40 | | and | 14.0 | 15.0 | 1.0 | 1.75 | | and | 20.0 | 21.0 | 1.0 | 0.84 | | and | 39.0 | 40.0 | 1.0 | 1.19 | | RC-26-236 | 37.0 | 39.0 | 2.0 | 0.47 | | RC-26-237 | 12.0 | 17.0 | 5.0 | 0.29 | | and | 20.0 | 21.0 | 1.0 | 1.34 | | RC-26-238 | 15.0 | 18.0 | 3.0 | 0.42 | | and | 22.0 | 25.0 | 3.0 | 0.80 | | RC-26-240 | 15.0 | 18.0 | 3.0 | 4.70 | | including | 16.0 | 17.0 | 1.0 | 12.98 | | RC-26-241 | 10.0 | 11.0 | 1.0 | 2.86 | | and | 31.0 | 33.0 | 2.0 | 0.53 | | RC-26-242 | 21.0 | 25.0 | 4.0 | 0.72 | | and | 49.0 | 50.0 | 1.0 | 0.64 | | RC-26-244 | 43.0 | 44.0 | 1.0 | 0.63 | | RC-26-245 | 28.0 | 35.0 | 7.0 | 0.51 | | RC-26-246 | 11.0 | 16.0 | 5.0 | 1.48 | | and | 18.0 | 19.0 | 1.0 | 0.86 | | and | 36.0 | 39.0 | 3.0 | 5.11 | | RC-26-247 | 23.0 | 25.0 | 2.0 | 6.27 | | including | 23.0 | 24.0 | 1.0 | 11.78 | | RC-26-248 | 15.0 | 18.0 | 3.0 | 2.32 | | and | 20.0 | 23.0 | 3.0 | 0.57 | | and | 44.0 | 45.0 | 1.0 | 0.84 | | RC-26-249 | 14.0 | 16.0 | 2.0 | 6.76 | | including | 14.0 | 15.0 | 1.0 | 12.75 | | RC-26-249 | 20.0 | 24.0 | 4.0 | 3.11 | | RC-26-251 | 11.0 | 18.0 | 7.0 | 2.84 | | and | 26.0 | 28.0 | 2.0 | 1.55 | | and | 45.0 | 46.0 | 1.0 | 1.83 | | RC-26-252 | 10.0 | 13.0 | 3.0 | 4.84 | | and | 21.0 | 23.0 | 2.0 | 0.67 | | and | 37.0 | 41.0 | 4.0 | 0.72 | | RC-26-259 | 23.0 | 26.0 | 3.0 | 0.54 | | and | 27.0 | 30.0 | 3.0 | 4.78 | | including | 28.0 | 29.0 | 1.0 | 12.05 | | RC-26-260 | 10.0 | 12.0 | 2.0 | 2.53 | | and | 25.0 | 27.0 | 2.0 | 1.16 | | and | 34.0 | 37.0 | 3.0 | 1.48 | | RC-26-262 | 30.0 | 33.0 | 3.0 | 0.82 | | RC-26-263 | 16.0 | 23.0 | 7.0 | 1.30 | | and | 41.0 | 42.0 | 1.0 | 1.16 | | and | 45.0 | 47.0 | 2.0 | 0.68 | | RC-26-267 | 23.0 | 30.0 | 7.0 | 1.61 | | RC-26-270 | 13.0 | 15.0 | 2.0 | 0.37 | | RC-26-271 | 13.0 | 20.0 | 7.0 | 4.16 | | including | 14.0 | 15.0 | 1.0 | 20.15 | | RC-26-272 | 15.0 | 16.0 | 1.0 | 1.04 | | and | 22.0 | 27.0 | 5.0 | 1.32 | | and | 30.0 | 31.0 | 1.0 | 0.99 | | RC-26-273 | 11.0 | 14.0 | 3.0 | 6.46 | | including | 13.0 | 14.0 | 1.0 | 18.88 | | and | 23.0 | 29.0 | 6.0 | 0.44 | | and | 31.0 | 33.0 | 2.0 | 2.83 | | RC-26-274 | 14.0 | 19.0 | 5.0 | 2.92 | | including | 16.0 | 17.0 | 1.0 | 11.29 | | RC-26-278 | 20.0 | 22.0 | 2.0 | 0.61 | | RC-26-279 | 10.0 | 18.0 | 8.0 | 1.84 | | RC-26-280 | 17.0 | 28.0 | 11.0 | 0.51 | | RC-26-283 | 13.0 | 16.0 | 3.0 | 0.40 | | and | 24.0 | 30.0 | 6.0 | 1.91 | | RC-26-284 | 11.0 | 12.0 | 1.0 | 2.01 | | and | 22.0 | 24.0 | 2.0 | 0.70 | | RC-26-285 | 17.0 | 18.0 | 1.0 | 0.99 | | RC-26-286 | 12.0 | 19.0 | 7.0 | 1.98 | | RC-26-287 | 11.0 | 12.0 | 1.0 | 0.40 | | and | 15.0 | 16.0 | 1.0 | 0.79 | | and | 18.0 | 24.0 | 6.0 | 0.88 | | and | 30.0 | 32.0 | 2.0 | 0.63 | | RC-26-288 | 12.0 | 14.0 | 2.0 | 1.60 | | and | 30.0 | 33.0 | 3.0 | 1.87 | | RC-26-289 | 9.0 | 12.0 | 3.0 | 0.59 | | and | 15.0 | 16.0 | 1.0 | 1.79 | | and | 25.0 | 29.0 | 4.0 | 1.17 | | RC-26-290 | 13.0 | 22.0 | 9.0 | 1.94 | | and | 33.0 | 37.0 | 4.0 | 0.67 | | RC-26-292 | 16.0 | 20.0 | 4.0 | 0.36 | | RC-26-293 | 11.0 | 17.0 | 6.0 | 3.11 | | including | 15.0 | 16.0 | 1.0 | 13.91 | | RC-26-295 | 18.0 | 22.0 | 4.0 | 0.97 | | and | 35.0 | 36.0 | 1.0 | 0.74 | | RC-26-296 | 11.0 | 17.0 | 6.0 | 1.43 | | and | 23.0 | 25.0 | 2.0 | 0.62 | | and | 27.0 | 29.0 | 2.0 | 2.20 | | and | 34.0 | 36.0 | 2.0 | 0.82 | | RC-26-297 | 15.0 | 16.0 | 1.0 | 1.03 | | RC-26-299 | 16.0 | 17.0 | 1.0 | 5.08 | | and | 19.0 | 20.0 | 1.0 | 1.29 | | and | 41.0 | 42.0 | 1.0 | 0.66 | | RC-26-300 | 40.0 | 42.0 | 2.0 | 0.53 | | RC-26-302 | 14.0 | 16.0 | 2.0 | 1.02 | | and | 31.0 | 32.0 | 1.0 | 0.49 | | and | 39.0 | 41.0 | 2.0 | 0.46 | | RC-26-303 | 13.0 | 17.0 | 4.0 | 0.49 | | and | 29.0 | 30.0 | 1.0 | 10.66 | | RC-26-305 | 8.0 | 10.0 | 2.0 | 0.33 | | RC-26-306 | 35.0 | 36.0 | 1.0 | 1.79 | | RC-26-307 | 22.0 | 24.0 | 2.0 | 0.87 | | and | 31.0 | 33.0 | 2.0 | 1.00 | | RC-26-308 | 10.0 | 11.0 | 1.0 | 1.02 | | and | 15.0 | 17.0 | 2.0 | 0.59 | | RC-26-309 | 10.0 | 12.0 | 2.0 | 0.55 | | and | 21.0 | 22.0 | 1.0 | 0.71 | | RC-26-581 | 11.0 | 13.0 | 2.0 | 1.97 | | and | 17.0 | 20.0 | 3.0 | 2.98 |