Capitan Silver Corp. press release

Capitan Silver Intersects 1,450.5 g/t Silver Equivalent over 1.5 Metres, Within a Wider Zone of 211.0 g/t Silver Equivalent over 41.1 Metres at the Cruz De Plata Project

2026-04-01

TSXV - TSX Venture Exchange · Silver · Gold · Lead · Zinc · Copper · Canada · Drill Results

Vancouver, British Columbia--(Newsfile Corp. - April 1, 2026) - Capitan Silver Corp. (TSXV: CAPT) (OTCQX: CAPTF) ("Capitan" or "the Company")is pleased to report assay results from its 2025 reverse circulation ("RC") drill program at its Cruz de Plata silver-gold project, located in Durango, Mexico. The Company is reporting assay results from ten (10) drill holes.

Highlights:

-

Discovery of another new high-grade silver zone developing at depth along the Jesus Maria Silver Trend, 240m west of the Peñoles Fault

-

Drill hole 25-ERRC-52returned multiple high-grade silver intercepts including:

1,450.5 g/t AgEq over 1.5m, within a broader zone of 1,131.5 over 3.0m 468.3 g/t AgEq over 4.6m 574.6 g/t AgEq over 3.0m All contained within a broad interval of 211.0 g/t AgEq over 41.1m

-

25-ERRC-52 extended mineralization by 25m down-dip along section from previously reported drill hole JEMA-02

-

JEMA-02 (_completed by previous operator Minera Fresnillo S. A. de C. V., see Capitan news release dated December 6, 2022) _intersected 531.06 g/t AgEq over 1.3m, within a broader zone of 213.9 g/t AgEq over 6.85m, within a wider interval of 93.3 g/t AgEq over 29m

-

Drill holes 25-ERRC-52 and previously reported drill hole 25-ERRC-38 (see Capitan news release dated Feb 26, 2026) show evidence that mineralized silver zones have the potential to get wider at depth and intercept multiple high-grade zones

-

Capitan's most advanced target at the Cruz de Plata Project, the Jesus Maria Silver Trend, has only been drilled to an average depth of 188m along 2.5km of a 3.7km strike

-

A key objective of the Company's 60,000m drill program will be to extend mineralization to depth along the Jesus Maria Silver Trend

-

Additional drilling along the Jesus Maria Silver Trend, west of the Peñoles Fault, returned strong silver grades, extended mineralization at depth, and confirms continuity along strike

-

Drill hole 25-ERRC-48intersected multiple zones with strong silver values, including:

-

220.1 g/t AgEq over 1.5m, within a broader zone of 156.8 g/t AgEq over 3.0m

-

175.3 g/t AgEq over 3.0m, within a broader zone of 86.4 g/t AgEq over 15.2m

-

Drill hole 25-ERRC-48 extended mineralization 50m down-dip from previously announced drill hole 25-ERRC-25

-

25-ERRC-25 _(see Capitan news release dated November 11, 2025)_intersected 687.4 g/t AgEq over 1.5m, within a wider interval of 250.3 g/t AgEq over 6.1m

-

Drilling on eastern side of the Peñoles Fault extends silver mineralization

-

Drill hole 25-ERRC-44returned multiple mineralized intervals, including 256.3 g/t AgEq over 3.0m

-

New gold zone discovered to the north of the Jesus Maria Silver Trend, to the north of the Gully Fault, and in close proximity to the Capitan Hill oxide gold deposit

-

Drill hole 25-JMRC-27intersected 0.44 g/t Au over 24.4m

-

60,000m multi-rig drill program continues to gather momentum: drilling is ramping up at Cruz de Plata, with three (3) of four (4) rigs now on site. The fourth rig is expected to arrive on site in the coming weeks. The Company's 2026 drill program will be comprised of three diamond (core) rigs and one RC rig

-

Catalysts: Final assays pending for 38 drill holes

-

24 - RC holes

-

14 - Core holes

-

Property-wide airborne geophysical survey completed; results expected in Q2 2026. These results will assist with definition of deeper targets property-wide

Alberto Orozco, CEO of Capitan Silver, commented:

"Drilling at Cruz de Plata continues to deliver high-grade results. These recent assays not only continue to identify new high-grade zones of mineralization but also expand previously identified mineralization along strike and at depth and demonstrate excellent continuity.

Additionally, I am excited by what we are seeing in terms of silver mineralization at depth. Specifically, drill holes 25-ERRC-52 and 25-ERRC-38, which show that as we go deeper, we are seeing mineralized zones getting larger and intersecting multiple high-grade vein structures. Given the nature of intermediate sulfidation epithermal systems — which are known to have deep roots — these results signal the potential for greater scale at depth, which we will be drill testing this year with diamond core rigs."

[](https://images.newsfilecorp.com/files/7373/290837_capitanfig1.jpg)

Figure 1: Drill Plan Map

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7373/290837_capitanfig1.jpg

Discussion of Drill Results

Drilling at the Company's Cruz de Plata silver-gold project is ongoing, with the results reported in this release from several areas on the property, including the Jesus Maria Silver Trend (both west and east of the Peñoles Fault), the San Rafael area, as well as testing new targets along the Gully Fault. The most significant development is the discovery of anew zone of high-grade silver mineralization at depth, located approximately 240m west of the Peñoles Fault and 130m west of a previously reported new high-grade silver zone developing on the Jesus Maria Silver Trend, on the west side of the Peñoles Fault.

Drill hole 25-ERRC-52(see Figure 2) was collared at the same location as previously reported drill hole JEMA-02 which was drilled by its previous owner, Minera Fresnillo S. A. de C. V. (a wholly owned subsidiary of Fresnillo plc) and was subsequently acquired by Capitan in 2022 (see Capitan news release dated December 6, 2022). Previously reported drill hole JEMA-02 intersected 531 g/t AgEq over 1.3m within 214 g/t AgEq over 6.85m, within a wider zone of 93 g/t AgEq over 29m.

Drill hole 25-ERRC-52returned a wide, strong zone of silver mineralization, with several significant high-grade intervals including1,450.5 g/t AgEq over 1.5m, within a wider zone of 1,131.5 g/t AgEq over 3.0m, 468.3 g/t AgEq over 4.6m, and 574.6 g/t AgEq over 3.0m, all within a broad interval of 211.0 g/t AgEq over 41.1m.This hole extended mineralization down-dip approximately 25m from drill hole JEMA-02, with the zone remaining open along strike and at depth. The diamond drill rig is currently completing additional drilling in this area, with results pending.

[](https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_003full.jpg)

Figure 2: Cross section, drill hole 25-ERRC-52

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_003full.jpg

Additional drilling along the Jesus Maria Silver Trend west of the Peñoles Fault continued to grow mineralization at depth, as well as increase confidence and continuity of mineralization along strike. Drill holes 25-ERRC-39, 25-ERRC-40, 25-ERRC-41, 25-ERRC-48, and 25-ERRC-51all targeted down-dip, on-section extensions of mineralization along this trend. All drill holes returned multiple intervals of silver mineralization and extended mineralization to depth, along section between 20m to 50m, with the best values returned from holes 25-ERRC-48 and 51. Drill hole 25-ERRC-48 (see Figure 3) intersected 220.1 g/t AgEq over 1.5m, within 156.8 g/t AgEq over 3.0m, 175.3 g/t AgEq over 3.0, within 86.4 g/t AgEq over 15.2m, and drill hole 25-ERRC-51 intersected 171.8 g/t AgEq over 4.6m and175.7 g/t AgEq over 3.0m.

[](https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_004full.jpg)

Figure 3: Cross section, drill hole 25-ERRC-48

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_004full.jpg

Drilling at the Jesus Maria Silver Trend east of the Peñoles Fault continued to indicate that this area consists of multiple, sub-parallel zones of silver mineralization with strong silver grades. Drill hole 25-ERRC-44intersected multiple zones of silver mineralization, over broad widths with higher-grade cores. Results include 256.3 g/t AgEq over 3.0m, within a broader zone of 181.3 g/t AgEq over 4.6m and 138 g/t AgEq over 1.5m, within a wider interval of 63.5 g/t AgEq over 9.1m, as well as 117.3 g/t AgEq over 1.5m, within a broader zone of 78.8 g/t AgEq over 4.6m.RC drilling in 2026 is focusing on this area, and has continued to build out this zone to the east, as well as testing additional trends to the north.

Evidence of Strong Silver Mineralization at Depth at the Jesus Maria Silver Trend

Given that the Cruz de Plata project is an intermediate sulphidation epithermal system, and that these systems have the potential for strong vertical continuity, there is an interesting opportunity for silver mineralized zones to widen at depth. Both drill hole 25-ERRC-52 and previously reported drill hole 25-ERRC-38 (see Figures 2 and 4) illustrate this opportunity, with broad silver mineralized zones intersecting multiple veins with higher silver grades being encountered at depth.

Thus far, the average hole depth for the 2025 program is 188m with a median depth of 173m, indicating that the majority of the drilling at Cruz de Plata is still relatively shallow, and remains open to expansion at depth. One of the key objectives of the 60,000m drill campaign that has been announced for 2026 is to extend silver mineralization to depth along the Company's most advanced target, The Jesus Maria Silver Trend.

[](https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_005full.jpg)

Figure 4: Cross sections of drill holes 25-ERRC-38 and 34

To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7373/290837_b53d9c3614b469a4_005full.jpg

Discovery of New Gold Zone

Drill hole 25-JMRC-27intersected a new zone of gold mineralization over significant widths. Results include 0.44 g/t Au over 24.4m, with additional gold mineralization intersected by drill hole 25-JMRC-28. This style of gold mineralization has been documented in the footwall where Jesus Maria intersects the Gully Fault. While not a focus of the program at this time, this new gold zone could present additional optionality for the Company due to its proximity to the Capitan Hill oxide gold deposit, where the Company delineated a pit-constrained inferred Mineral Resource of 525,000 ounces of gold at a grade of 0.4 g/t Au (see Capitan news release dated December 5, 2025).

Change of Analytical Laboratory

The Company also reports that it has engaged SGS Canada to be the primary laboratory for all drill hole and surface samples going forward. This decision ensures that all sample preparation and analysis remain in Mexico, within 3 hours of the project site. This shift is expected to help significantly streamline the analysis sequence, resulting in faster turnaround times as the 2026 drilling program continues to ramp-up.

Table 1: Drill Results

| Hole ID | From (m) | To (m) | Interval (m) | Ag Eq Rec (g/t) | Ag (ppm) | Au (ppm) | Pb (%) | Zn (%) | | 25-ERRC-39 | | | | | | | | | | Interval | 56.4 | 57.9 | 1.5 | 71.9 | 28.3 | 0.012 | 0.201 | 1.140 | | Interval | 86.9 | 91.4 | 4.6 | 67.4 | 51.8 | 0.073 | 0.113 | 0.308 | | including | 89.9 | 91.4 | 1.5 | 151.9 | 125.1 | 0.019 | 0.214 | 0.793 | | Interval | 178.3 | 179.8 | 1.5 | 74.6 | 30.0 | 0.197 | 0.179 | 0.817 | | 25-ERRC-40 | | | | | | | | | | Interval | 6.1 | 9.1 | 3.0 | 37.2 | 32.5 | 0.067 | 0.015 | 0.050 | | Interval | 54.9 | 56.4 | 1.5 | 34.3 | 29.7 | 0.055 | 0.008 | 0.069 | | Interval | 59.4 | 61.0 | 1.5 | 27.0 | 18.9 | 0.008 | 0.103 | 0.169 | | Interval | 71.6 | 73.2 | 1.5 | 60.5 | 50.1 | 0.044 | 0.103 | 0.220 | | Interval | 125.0 | 128.0 | 3.0 | 37.7 | 28.3 | 0.081 | 0.068 | 0.107 | | Interval | 187.5 | 189.0 | 1.5 | 26.6 | 9.7 | 0.125 | 0.137 | 0.148 | | 25-ERRC-41 | | | | | | | | | | Interval | 0 | 4.6 | 4.6 | 26.3 | 20.6 | 0.071 | 0.013 | 0.048 | | Interval | 13.7 | 15.2 | 1.5 | 52.7 | 43.4 | 0.150 | 0.018 | 0.032 | | Interval | 19.8 | 21.3 | 1.5 | 28.7 | 21.8 | 0.105 | 0.004 | 0.027 | | Interval | 59.4 | 61.0 | 1.5 | 57.2 | 36.5 | 0.044 | 0.241 | 0.386 | | Interval | 70.1 | 73.2 | 3.0 | 41.4 | 36.0 | 0.021 | 0.078 | 0.116 | | Interval | 96.0 | 97.5 | 1.5 | 32.8 | 9.8 | 0.033 | 0.125 | 0.525 | | Interval | 147.8 | 149.4 | 1.5 | 131.3 | 93.0 | 0.039 | 0.587 | 0.726 | | Interval | 158.5 | 160.0 | 1.5 | 66.7 | 68.4 | 0.014 | 0.012 | 0.031 | | Interval | 211.8 | 213.4 | 1.5 | 26.9 | 5.6 | 0.187 | 0.161 | 0.124 | | 25-ERRC-44 | | | | | | | | | | Interval | 65.5 | 70.1 | 4.6 | 181.3 | 183.0 | 0.111 | 0.008 | 0.041 | | including | 65.5 | 68.6 | 3.0 | 256.3 | 261.0 | 0.130 | 0.012 | 0.052 | | Interval | 74.7 | 76.2 | 1.5 | 33.7 | 11.2 | 0.328 | 0.001 | 0.017 | | Interval | 91.4 | 100.6 | 9.1 | 63.5 | 54.2 | 0.170 | 0.006 | 0.019 | | including | 97.5 | 99.0 | 1.5 | 138.0 | 128.3 | 0.234 | 0.011 | 0.030 | | Interval | 141.7 | 146.3 | 4.6 | 78.8 | 67.6 | 0.183 | 0.038 | 0.048 | | including | 143.2 | 144.8 | 1.5 | 117.3 | 107.7 | 0.170 | 0.070 | 0.070 | | Interval | 214.9 | 217.9 | 3.0 | 79.6 | 74.1 | 0.081 | 0.037 | 0.099 | | 25-IPRC-01 | | | | | | | | | | Interval | 88.4 | 89.9 | 1.5 | 50.8 | 19.7 | 0.466 | 0.001 | 0.005 | | Interval | 146.3 | 147.8 | 1.5 | 72.8 | 70.7 | 0.075 | 0.015 | 0.024 | | Interval | 271.3 | 272.8 | 1.5 | 54.1 | 51.1 | 0.022 | 0.046 | 0.096 | | Interval | 278.9 | 280.4 | 1.5 | 59.9 | 29.4 | 0.025 | 0.085 | 0.829 | | Interval | 300.2 | 301.8 | 1.5 | 44.0 | 19.1 | 0.024 | 0.365 | 0.416 | | Interval | 307.8 | 309.4 | 1.5 | 35.6 | 10.7 | 0.009 | 0.284 | 0.499 | | Interval | 315.5 | 317.0 | 1.5 | 25.6 | 25.1 | 0.014 | 0.014 | 0.020 | | 25-JMRC-27 | | | | | | | | | | Interval | 21.3 | 45.7 | 24.4 | 38.1 | 6.4 | 0.436 | 0.004 | 0.059 | | Interval | 50.3 | 51.8 | 1.5 | 26.4 | 23.0 | 0.018 | 0.006 | 0.098 | | Interval | 106.7 | 108.2 | 1.5 | 32.8 | 15.8 | 0.134 | 0.091 | 0.180 | | 25-JMRC-28 | | | | | | | | | | Interval | 0 | 1.5 | 1.5 | 45.5 | 16.4 | 0.234 | 0.150 | 0.287 | | Interval | 27.4 | 30.5 | 3.0 | 33.5 | 10.1 | 0.310 | 0.013 | 0.070 | | Interval | 36.6 | 42.7 | 6.1 | 26.8 | 8.5 | 0.178 | 0.024 | 0.172 | | Interval | 114.3 | 115.8 | 1.5 | 53.2 | 18.8 | 0.488 | 0.030 | 0.033 | | 25-ERRC-48 | | | | | | | | | | Interval | 59.4 | 61.0 | 1.5 | 31.9 | 30.0 | 0.047 | 0.005 | 0.011 | | Interval | 83.8 | 85.3 | 1.5 | 27.4 | 21.0 | 0.089 | 0.004 | 0.042 | | Interval | 140.2 | 143.3 | 3.0 | 156.8 | 153.0 | 0.162 | 0.018 | 0.039 | | including | 140.2 | 141.7 | 1.5 | 220.1 | 228.0 | 0.052 | 0.021 | 0.048 | | Interval | 169.2 | 184.4 | 15.2 | 86.4 | 60.3 | 0.105 | 0.192 | 0.503 | | including | 176.8 | 179.8 | 3.0 | 175.3 | 153.0 | 0.175 | 0.120 | 0.472 | | Interval | 196.6 | 198.1 | 1.5 | 147.6 | 121.0 | 0.343 | 0.232 | 0.112 | | Interval | 228.6 | 230.1 | 1.5 | 31.3 | 26.0 | 0.006 | 0.046 | 0.151 | | Interval | 245.4 | 246.9 | 1.5 | 46.0 | 37.0 | 0.010 | 0.019 | 0.294 | | Interval | 254.5 | 257.6 | 3.0 | 50.6 | 39.5 | 0.039 | 0.065 | 0.264 | | 25-ERRC-51 | | | | | | | | | | Interval | 13.7 | 19.8 | 6.1 | 45.8 | 43.8 | 0.057 | 0.004 | 0.018 | | Interval | 41.1 | 42.7 | 1.5 | 43.5 | 35.0 | 0.149 | 0.002 | 0.009 | | Interval | 62.5 | 73.2 | 10.7 | 84.8 | 82.9 | 0.063 | 0.017 | 0.062 | | including | 68.6 | 73.2 | 4.6 | 171.8 | 172.7 | 0.080 | 0.034 | 0.090 | | Interval | 85.3 | 86.9 | 1.5 | 35.3 | 35.0 | 0.016 | 0.006 | 0.033 | | Interval | 91.4 | 99.1 | 7.6 | 104.3 | 99.8 | 0.087 | 0.042 | 0.096 | | including | 93.0 | 96.0 | 3.0 | 175.7 | 170.5 | 0.143 | 0.071 | 0.110 | | Interval | 140.2 | 143.3 | 3.0 | 74.3 | 75.5 | 0.022 | 0.016 | 0.041 | | Interval | 161.5 | 163.1 | 1.5 | 55.3 | 54.0 | 0.023 | 0.012 | 0.076 | | 25-ERRC-52 | | | | | | | | | | Interval | 25.9 | 27.4 | 1.5 | 80.2 | 28.0 | 0.777 | 0.003 | 0.011 | | Interval | 44.2 | 45.7 | 1.5 | 74.0 | 70.0 | 0.105 | 0.004 | 0.025 | | Interval | 59.4 | 62.5 | 3.0 | 62.7 | 59.0 | 0.082 | 0.015 | 0.036 | | Interval | 73.2 | 74.7 | 1.5 | 33.0 | 22.0 | 0.177 | 0.001 | 0.004 | | Interval | 138.7 | 179.8 | 41.1 | 211.0 | 192.7 | 0.163 | 0.249 | 0.341 | | including | 149.4 | 152.4 | 3.0 | 574.6 | 517.0 | 0.515 | 0.831 | 0.878 | | including | 157.0 | 161.5 | 4.6 | 468.3 | 391.0 | 0.595 | 0.805 | 1.095 | | including | 169.2 | 172.2 | 3.0 | 1,131.5 | 1,143.0 | 0.188 | 0.605 | 0.801 | | and including | 170.7 | 172.2 | 1.5 | 1,450.5 | 1,462.0 | 0.259 | 0.771 | 1.080 | | Interval | 225.6 | 227.1 | 1.5 | 31.2 | 12.0 | 0.005 | 0.061 | 0.524 |

Metal Recovery: Ag 94%, Au 86%, Pb 93.5%, Zn 92% _AgEq considers Ag, Au, Pb and Zn and calculated as follows: AgEq = Ag g/t + (80x Au g/t) + (0.003 x Pb g/t) + (0.0037 x Zn g/t). High grades have not been capped. RC Drill samples have been analysed by Bureau Veritas using the following codes: MA300, 4-acid digestion, multi-element analysis (Vancouver Lab). Au is analyzed using Fire Assay (FA430, Hermosillo Lab). Overlimit (>200 ppm Ag) assays utilize method MA370, with gravimetric utilized for any overlimit thereafter. RC Drill samples have also been sent to SGS labs in Durango for Fire assay and Four-acid Multi-element analysis using the following codes: GE-FAA30V6 and GEICP40Q12, with over assays using the following codes: GO_FAG37V for Au and Ag. QAQC: Capitan Silver maintains a rigorous QAQC program and inserts multiple standards, blanks and duplicates into the sample stream at regular intervals. Check Assays will be performed at ALS laboratories in Zacatecas, Mexico. True widths along the Jesús María Trend are estimated to be 70-90% of the drilled width. At new drill targets/discoveries, true widths are unknown. Intervals are calculated at a 25 g/t AgEq cut-off and are cut at a maximum of 3 metres of internal dilution. Some numbers may not sum correctly due to rounding._

Qualified Person

The scientific and technical information in this news release has been reviewed and approved by Marc Idziszek, P.Geo, Vice President Exploration of Capitan, and a "qualified person" (with the meaning of National Instrument 43-101 - Standards of Disclosure for Mineral Projects).

About Capitan Silver Corp.

Capitan Silver is defining a new high-grade silver system at its Cruz de Plata project, located in the heart of Mexico's primary silver belt. The Company is led by a proven and accomplished management team that has previously advanced three projects into production, on time and on budget. The Company has been diligent in maintaining a tight share structure and has one of the tightest share structures among its peer group, with the top three shareholders owning approximately 37% of the Company's share capital. Capitan Silver is fully funded and actively drilling at its Cruz de Plata silver project.

ON BEHALF OF CAPITAN SILVER CORP.

"Alberto Orozco"

Alberto Orozco, CEO

For Additional Information Contact:

| Alberto Orozco, CEO Capitan Silver Corp. info@capitansilver.com | Greg DiTomaso, Investor Relations Capitan Silver Corp. info@capitansilver.com Phone: (416) 433-2801 www.capitansilver.com |

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING INFORMATION

Certain statements contained in this news release constitute _"_forward-looking statements_"_within the meaning of applicable Canadian securities legislation (collectively, _"_forward-looking statements_"_). All statements, other than statements of historical fact, contained in this news release are forward-looking statements. These forward-looking statements, by their nature, require Capitan to make certain assumptions and necessarily involve known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied in these forward-looking statements. Forward-looking statements are not guarantees of future performance.

Forward-looking statements may be identified by the use of words or phrases such as _"_may_"_, _"_will_"_, _"_would_"_, _"_could_"_, _"_should_"_, _"_expect_"_, _"_believe_"_, _"_plan_"_, _"_anticipate_"_, _"_intend_"_, _"_estimate_"_, _"_continue_"_, _"_objective_"_, _"_potential_"_, _"_target_"_, _"_strategy_"_, _"_project_"_, _"_forecast_"_, _"_outlook_"_, _"_scheduled_"_, _"_seek_"_, _"_explore_"_and other similar terminology, as well as terms usually used in the future and the conditional, and the negatives thereof, or comparable terminology, are intended to identify forward-looking statements. In particular, but without limiting the foregoing, this news release contains forward-looking statements with respect to: expectations regarding the Company's 2026 drilling program at the Cruz de Plata project, including the planned 60,000-metre multi-rig program; anticipated timing and results of future assay results; the potential scale, continuity, and grade of mineralization at the Cruz de Plata project; the potential to expand known zones of mineralization; the prospectivity of the Cruz de Plata project and its exploration potential; management's beliefs regarding the mineralized system at Cruz de Plata; and the Company's strategy and exploration objectives.